Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

12.06.2025 17:12

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

This device then solves the entire problem.

A circuit breaker is similar, but is resettable.

Tahini Is The High Protein Food You Can Eat Every Day—With Almost Everything - Vogue

2024–10–16 [ OO OLAOYE OYEBODE ]

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Barnstars:

Mars Orbiter Captures Rare View of Ancient Volcano Poking Above the Clouds - Gizmodo

One

eight

I post the exact comment here.

We Bought a ‘Peeing’ Robot Attack Dog From Temu. It Was Even Weirder Than Expected - WIRED

The third is lightning and “how it gets conducted into a home.”

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

This is where this question deviates from being a 'generic' question, and becomes more specific.

Why are perceived or real slights interpreted as rejections and reality by pwBPD?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

An AC voltage/ current source, and an ac inductive load.

This is 'the assistant's answer'

Where do high school kids get weed from?

What is lightning?

The MOV will conduct when the voltage exceeds 50% of line voltage.

What does a fuse do?

What's the most trivial thing that ever made you go to the doctor?

A fuse is a non-resetable over current circuit protector.

One is “what exactly is in a ‘surge protector’ ? ”

The bolt then partially travels down the line to your home.

Do you think Japan will have same-sex marriage by 2030?

Now when you have a certain ac resistance, then a current flows in a loop.

but this device (an Inductor) … impedes the rapid changes in the current.

Upvotes:

Do you want to have an XXX chat?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

2024–10–14 [Omar Gharbi Omar Gharbi ]

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Why did Sumire's summoning Nue act strangely in response to Kawaki's karma?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

It also is a device that limits the change in current flow.

Why was Nietzsche against essentialism?

[image of Common-mode choke]

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Giant Inland Boulder a Remnant of Ancient Tsunami - Newser

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

At one ohm, the resistor has a maximum of 1 watt power.

But… the neutral is now “floating” because of the 1 ohm resistance.

New COVID variant could come with extremely painful symptom - PennLive.com

Can the fuse protect the electronic devices from lightning instead of a surge protector.

This is where the MOV conducts again, and dissipated the energy.

2024–10–10[John johnson John Johnson ]

Woodruff departs rehab outing after taking liner to elbow - MLB.com

Edit 2024–10.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

nine

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

In schematic diagrams this is the symbol for a fuse:

The other is “what does a “fuse” do?”

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

the problem then depends on "how fast does the fuse operate?".

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This is the picture of an electronic coil of wire wound around a core of magnetic material.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

So, the voltage could go up to 500 volts, and the fuse will not open up.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

There are three different concepts here that are getting confused.

This one hit behind the barn.

But it can get overloaded, and no longer works.

These are simplified answers to the original question, and does not change anything I wrote above.

(Dc diagram shown, AC is similar).

what exactly is a ‘surge’ protector?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

a photo is worth a thousand words.

For this case there are devices called Metal oxide varistors (MOV).

He then describes Rainy Season and Lightning.

[old diagram got deleted by accident]

These devices are installed between the “hot” and “neutral” and protective ground.

There are two important concepts here.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Because the load is inductive, the current lags the voltage.(by a bit).

At least they know the answer if they wanted it.

First Sentence:

so, what happens?

He then asserts :

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

but I think this circuit , shows a few more pieces.

Here is a simplified AC power diagram.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

He then describes the function of a fuse.

It seems Mohan does not understand the difference between a comment and an Answer.